Skip to content
Klang IndustrialMs Teh Seok Hoon, PEA 4006

Industrial building inspection in Klang: roof, steel frame, asbestos, termites, fire damage and wiring

Ms Teh Seok Hoon, PEA 4006. Updated

Before you buy or rent a used factory in Klang, Kapar, Meru or Port Klang, check the roof, steel frame, wiring and records yourself, then pay a Professional Engineer to inspect when the building is old, shows rust, sagging or fire marks, or may have asbestos-cement roofing. A bank valuer is not expected to do a structural survey, so the inspection that protects you is the one you order before you sign.

Key takeaways

  • A bank valuer is not expected to do a structural survey: commission your own inspection before you sign the agreement or the tenancy.
  • JKR's 2026 guideline gives metal roofing a life of 20 to 40 years; ask the year the roof was laid and look for leaks in heavy rain.
  • Chrysotile asbestos-cement sheets are still legal in Malaysia; removal needs a contractor who notifies DOSH at least two weeks ahead.
  • A non-domestic electrical installation must be tested at least every five years: ask for the record book and Forms G and H.
  • After a fire, or with heavy rust, have a Professional Engineer check the frame, connections and slab before you rely on them.
Factory and warehouse hall
Factory and warehouse hall · Illustrative image
Metal roofing life (JKR, 2026)
20 to 40 years
Steel roof trusses (JKR, 2026)
25 to 40 years
Electrical test, non-domestic installation
At least every 5 years (Electricity Regulations 1994, reg. 110)
Notice to DOSH before asbestos removal
At least 2 weeks before site preparation
Provisional anti-dumping duty on imported aluminium and zinc coated steel (from 7 Nov 2026)
4.41% to 35.06%

Do you need a paid building inspection?

Nobody orders a building survey for you. The bank sends a valuer, but the Board of Valuers' standard on inspection says the valuer is not expected to undertake a structural survey or to check whether the plant and equipment serving the building are adequate; the valuer only has to point out visible major defects (Board of Valuers). The inspection that protects you is the one you commission yourself, before you sign the sale and purchase agreement or the tenancy.

It is worth paying for one when the building is old, when the roof sheets may be asbestos-cement, when you see rust at column bases or connections, when there are signs of a past fire, when extensions or mezzanines do not match the approved plans (see illegal extensions on a Klang factory), or when you plan cranes, high racking or heavy machines. A Professional Engineer (civil or structural) looks at the frame, roof and slab; the wiring is work for the competent persons named in the Electricity Regulations 1994; asbestos removal goes to a contractor that follows DOSH's guideline. We found no official fee scale for a pre-purchase survey, so fees vary with floor area, access and the tests you ask for: get a written scope, the list of tests, a fixed fee and a report date before you commit.

Ask the seller or landlord for the records first. In Klang, Port Klang, Kapar and Meru the council is MBDK (MBDK); its form for a copy of the certificate of fitness (CF) gives a copy for personal records only to the owner of the premises, so ask the seller to apply (MBDK form). In Puncak Alam, MPKS has its own form for a search of a CF copy (MPKS). A tenant should list every defect found in a signed condition schedule; who repairs what in a rented Klang factory explains how the agreement splits the work.

  • Approved building plans, any approved amendments, and the CF or CCC
  • The electrical inspection record book and the latest five-yearly test report
  • Forms G and H for any rewiring or extension of the installation
  • The year the roof was laid, the sheet specification and any warranty
  • Fire and insurance claim history, and what was repaired
  • Pest control records for offices, doors and timber mezzanines

Roof leaks, roof life and the cost of a new roof

To check for leaks, visit during or right after heavy rain, which Klang gets often in the afternoon: a Klang city councillor warned of frequent afternoon storms after an April 2026 storm lifted house roofs and brought down trees (Sin Chew Daily). Switch off the lights and look up for daylight at sheet laps, bolts and the ridge. Then look down: wet patches or rust stains on the slab, stained ceiling boards in the office, rust streaks on purlins and silicone or bitumen patches all show where water got in before. Check every gutter and outlet; one blocked outlet can send water through a roof, as happened at KLIA Terminal 1 in November 2025 when plywood left over a drainage point during roof works stopped the flow (FMT).

Wind matters as much as rain. On 4 November 2026 strong winds lifted roofs along the road to Port Klang (Nanyang Siang Pau). Newer sheets beside faded ones, new ridge capping or fresh fixings can mean a past repair: ask what happened and who did the work.

How long does a factory roof last? JKR's guideline on the life of government buildings and assets, first printed in June 2026, gives metal roofing a useful life of 20 years, a design life of 30 and a total life of up to 40; galvanised iron gutters 20 to 40 years; steel roof trusses 25 to 40; and glasswool insulation 20 to 50 (JKR). JKR adds that real life depends on the maker's specification, material quality, how the asset is used and maintained, and outside factors such as weather, air pollution and location. Ask for the year the roof was laid and the sheet specification, and compare.

What does a new roof cost? We found no official price list, and contractors price by roof area, sheet thickness and coating, insulation, gutters, access and scaffolding, and the removal and disposal of the old sheets. Ask at least two contractors for itemised quotes with a validity date. Material prices are moving: from 7 November 2026 MITI imposed provisional anti-dumping duties of 4.41% to 35.06% on aluminium and zinc coated flat steel from China, Taiwan and Vietnam for up to 120 days, with a final decision due by 6 March 2027 (The Edge); the petition behind it lists roofing and walling among the uses of that steel (MITI). Ask the council whether re-roofing needs a permit; MPKS, for example, has a minor repairs form (MPKS).

Asbestos-cement roof sheets

Asbestos is not only in old textbooks here. DOSH's Guidelines for Asbestos Removal 2017 say materials containing chrysotile are still used in Malaysia, that asbestos-cement was widely used in roofing and ceilings, and that asbestos also turns up in air-conditioning duct insulation, pipes, gaskets and fire doors (DOSH). Malaysia partially banned amphibole asbestos in 1999 but still allows the controlled use of chrysotile, or white asbestos (FMT), and in January 2026 the environment minister said a full ban was under review (FMT).

Intact corrugated roof sheets are classed as non-friable and generally do not release fibres, but asbestos-cement sheets can release airborne fibres when they are cut, sawn, sanded or broken (DOSH). That is why the real cost of an asbestos roof shows up when you want to change it: new skylights, a duct through the roof, rooftop solar or a full re-roof all disturb the sheets. If the seller cannot say what the grey corrugated sheets are made of, treat them as possible asbestos-cement until a sample is identified, and do not let anyone drill, cut or walk on them meanwhile.

Removal is regulated work. DOSH expects the contractor to carry out a hazard identification, risk assessment and risk control (HIRARC) and a chemical health risk assessment (CHRA), and to submit its documents, including its method of identifying asbestos, for DOSH's acknowledgement at least two weeks before preparing the site; DOSH may inspect. The waste is scheduled waste SW 201 under the Environmental Quality (Scheduled Wastes) Regulations 2005 and goes to assigned sites through a licensed contractor (DOSH). Price this into your offer or the tenancy terms before you sign.

Steel frame, rust and the floor slab

JKR's guideline puts structural steel at 50 years and steel roof trusses at 25 to 40, and names weather, air pollution and location among the factors that change real life (JKR). That matters near the coast in Port Klang, Pulau Indah, Westport and Kapar: a Malaysian coatings maker describes salt exposure and humidity as daily conditions for coastal industrial assets (Bernama).

Walk the frame from the floor up: column bases and base plates where water sits after floods or floor washing, anchor bolts, bolted joints at the rafters, purlins under leaking laps, crane beams and brackets, and bracing that was cut to make room for a door or duct. Rust that flakes off in layers, rafters that sag, doors that no longer close, and cracks in the slab or walls are reasons to bring in a Professional Engineer before you sign. If you will load the floor with racking or machines, ask for the slab's design load from the plans and run your numbers through the floor loading calculator (FactoryHub).

A badly decayed building is more than a repair bill. Under section 83 of the Street, Drainage and Building Act 1974, a council that finds a building ruinous or dangerous can order the owner to repair or demolish it and can order the occupiers to vacate; the owner's repairs then need planning approval and approved plans before work starts (AGC).

Termites in a steel-framed factory

A steel frame does not stop termites eating the timber around it: office partitions, door frames, timber mezzanine floors, roof timber in older units, and the pallets and cartons in store. Termites feed on cellulose, mainly wood, and are drawn to damp, softened material, so roof leaks and termites often come together; one estimate puts termite damage to property in Malaysia at up to RM400 million a year (FMT).

The signs are mud tubes along the edges of walls, discarded wings on the floor, frass that looks like brown powder beside timber, doors and windows that have become hard to open, and timber that sounds hollow when knocked (FMT). Ask for the pest control records and, if you see any of these signs, for a termite inspection before you sign.

A factory that had a fire

Fires are part of the history of Klang's older industrial roads. On 9 March 2026 a fire at Jalan Kapar Batu 9 1/2, Kampung Perepat, hit three Class C factory buildings: a vehicle workshop was about 50% burnt, a recycling plant 100%, and a paint store was destroyed; 31 firefighters from six stations attended and the lack of an open water source made it hard to bring under control (Sin Chew Daily, Utusan Malaysia).

A building that went through a fire can be repaired, but you need to know what was done. Ask directly whether the unit or its neighbours ever had a fire, what the insurance claim covered, which members and sheets were replaced, whether a Professional Engineer certified the repairs, and whether the work was submitted to the council. On site, look for smoke staining, warped sheets, a block of new purlins or new sheets, fresh paint on only part of the frame, and new wiring without Forms G and H. Before you rely on the frame, have a Professional Engineer check the steel members, connections and slab, and have the wiring fully tested.

Wiring, switchboards and the records that prove them

The Electricity Regulations 1994 put the duty to keep an installation in good and working order on the owner, management or occupier. A non-domestic installation must be checked and tested by a competent person at least once every five years, and protective relays checked, tested and calibrated at least every two years (regulation 110). An installation of up to 600 volts fed through switchgear of 100 amperes or more must be visited by a competent person at least once a month; the report goes to the owner within two weeks and the owner keeps a book of records open to the Energy Commission (regulations 67 and 68). Rewiring or extending an installation needs a Supervision and Completion Certificate and a Test Certificate, Forms G and H (Energy Commission).

So ask for the record book, the latest five-yearly test report, the relay test and Forms G and H for any extension. For age, JKR gives low voltage cables 25 to 30 years, the metal enclosure of a main switchboard 15 to 20, circuit breakers 10 to 15 and protection relays 20 to 25 (JKR). Check that the supply suits your machines with the factory power calculator (FactoryHub) and read factory power in Klang: kVA, amps and a TNB upgrade.

Ms Teh can arrange viewings of used factories in Kapar, Meru, Port Klang and Pulau Indah, such as a detached factory in Meru for sale or rent, so you can run these checks before you sign.

Checking compliance, upgrading an old factory and environmental site assessment

How do I check that a Klang factory complies with all the rules before I buy or rent it?

Ask for one file of records and check each against the site. Approved plans with the CCC or CF, and no unapproved extensions. The current occupier's MBDK licence. A Bomba Fire Certificate if the premises are designated. DOSH certificates for cranes, boilers and pressure vessels, which is where most safety checks start. The electrical record book, five-yearly test report and Forms G and H. DOE notifications for effluent, emissions and scheduled waste.

How can an old factory in Klang be upgraded to a modern building?

Work from the parts that age first. JKR's 2026 asset life guideline gives metal roofing 20 to 40 years and LV cable 25 to 30, so roofs and wiring usually come first; asbestos sheets need DOSH notified two weeks before removal. Rewiring needs TNB's approval, and a bigger supply a new application. Sprinklers may be due if the floor area passes 2,000 m². Extensions and new structure need council approval before work.

Do I need an environmental site assessment before buying a factory in Klang?

No law requires one for an ordinary purchase, but it is worth it where the past use involved chemicals, metals, recycling or effluent. In Klang that covers much of Telok Gong, the port side chemical clusters and older Kapar estates. Start with the seller's DOE notifications and licences, any LUAS Zero Discharge licence and the site's history, then decide whether to pay for soil and groundwater sampling.

More on environmental checks

For what an environmental site assessment covers and costs to arrange, see FactoryHub's guide to environmental site assessment before buying a factory, from fellow CID agent Peter Tan.

Questions buyers and tenants ask

How do I check a factory roof for leaks during a viewing?

Go during or just after heavy rain. With the lights off, look up for daylight at sheet laps, bolts and the ridge; look down for wet patches and rust stains on the slab and stained office ceilings; and check that gutters and outlets are clear, because one blocked outlet can push water through the roof. Silicone or bitumen patches and newer sheets beside faded ones show where it leaked before.

How long does a factory metal roof last, and how much is a new one?

JKR's 2026 guideline gives metal roofing 20 to 40 years and galvanised gutters 20 to 40, with real life depending on the material, maintenance, weather and location. We found no official price list for re-roofing: quotes depend on roof area, sheet specification, insulation, gutters, access and disposal of the old sheets, and on steel prices, which provisional anti-dumping duties of 4.41% to 35.06% on imported aluminium and zinc coated steel may move from November 2026. Ask for itemised quotes with a validity date.

Is white asbestos (chrysotile) the same as the asbestos Malaysia banned? Can I keep an asbestos roof?

No, they are different types. Malaysia partially banned the amphibole types, which include blue asbestos (crocidolite) and brown asbestos (amosite), in 1999, while chrysotile, or white asbestos, is still allowed under controlled use, and a full ban was under review in January 2026. Intact sheets generally do not release fibres; cutting, sawing, sanding or breaking them does, so leave them alone until you plan removal through a contractor that notifies DOSH.

Is a building inspection compulsory before buying or renting a factory?

We found no rule that requires one, so it is your choice and your cost. The bank's valuer is not expected to do a structural survey and only reports visible major defects, so for an older unit, a suspected asbestos roof, rust in the frame, signs of fire or plans for heavy machinery, pay a Professional Engineer before you sign. Fees vary with size and tests: agree the scope, fee and report date first.

Should I walk away from a factory that once had a fire?

Not always. Ask what burnt, what the insurer paid for, which steel members and sheets were replaced, whether a Professional Engineer certified the repair and whether the council approved it. Look for smoke stains, warped sheets and patches of new steel or paint, and have the frame and wiring checked before you sign. If the seller cannot answer, price that uncertainty into your offer.

Can termites damage a steel factory?

They do not eat the steel frame, but they eat the timber in offices, doors, mezzanine floors, older roof timber and stored pallets and cartons, and they follow damp from roof leaks. Look for mud tubes on walls, shed wings, brown powder beside timber, sticking doors and hollow-sounding wood, and ask for pest control records.

Units in these places

Updated

Sources

Tell Ms Teh what you need

Send the size, power, ceiling height, budget and move-in date you need on WhatsApp, or call her directly.

WhatsApp Ms TehCall