Skip to content
Klang IndustrialMs Teh Seok Hoon, PEA 4006

Clear height, eaves height and ceiling height in a Klang factory: what 30 ft, 40 ft, 12 m and 15 m suit

Ms Teh Seok Hoon, PEA 4006. Updated

On a Klang listing, ceiling height usually means the eave, where roof meets wall; the apex is the ridge. Clear height is what you can use: floor to the lowest beam, pipe or sprinkler. Keep 1 m above the top pallet. So a 30 ft eave leaves about 8 m for racking, 40 ft (12 m) about 11 m and 15 m about 14 m, if the floor, forklift and fire design allow it.

Key takeaways

  • Listings in Klang quote the eave and often the apex; clear height is lower wherever beams, pipes, lights or sprinklers hang below the roof, so measure it on site.
  • Keep at least 1 m between the top pallet and the lowest roof structure (Ministry of Transport guidebook): about 8.1 m usable at 30 ft, 11.2 m at 40 ft and 14 m at 15 m.
  • Height only pays if the floor carries the extra levels, the forklift reaches them and the fire design covers them; goods stacked on the floor rarely use more than about 4 m.
  • In Selangor a single-storey store of combustible goods over 1,000 m² or 7,000 m³ needs sprinklers, and a store over 7,000 m³ needs a Fire Certificate renewed every year; a taller hall crosses the volume line on a smaller floor.
  • Column spacing decides how many rack bays and aisles fit: read the grid on the approved plans and count bays between column lines before you sign.
Warehouse with pallet racking
Warehouse with pallet racking · Illustrative image
Top pallet to lowest roof structure
At least 1 m (Ministry of Transport guidebook)
Headroom in a factory room where people work
At least 3 m (Selangor UBBL by-law 44)
Sprinkler line, single-storey store of combustible goods
Over 1,000 m² or 7,000 m³ (Selangor UBBL Tenth Schedule, 2012)
Eave heights on Ms Teh's list (Nov 2026)
15 ft (KIIP, Kapar) to 49 ft (Westport)

Ceiling height, eave, apex and clear height: what each number measures

A factory or warehouse with a pitched roof has two heights. The eave is the height where the roof meets the side wall. The apex is the height at the ridge, in the middle of the span. Ms Teh's listings print both, for example a 254,729 sq ft warehouse at Westport with a 49 ft eave and a 59 ft apex. When an owner or a listing gives one ceiling height, it is usually the eave and sometimes the apex, so ask which one it is.

The building by-laws use stricter words. The Selangor Uniform Building By-Laws measure the height of a room from the finished floor to the underside of the ceiling, and define headroom as the clear vertical distance between the finished floor and the soffit of the lowest projecting member above it. Headroom is what the trade calls clear height: the space you can actually fill. In a warehouse it ends at the lowest roof beam, sprinkler pipe, light fitting, duct or crane rail, and these often hang below the eave line.

The Ministry of Transport warehousing guidebook (National Logistics Task Force, May 2021) calls the height from the warehouse floor to the lowest point of the roof structure the clear operating height. It says a general warehouse usually does not exceed 7.5 m from the floor to the lowest point of the ceiling structure, that this can be raised for a storage system with at least 0.5 m left between the top of the system and that lowest point, and, in its fire section, that the highest pallet on a rack should stay at least 1 m below the lowest roof structure.

What 30 ft, 40 ft, 12 m and 15 m suit, and how many racking levels fit

Take the eave, convert it to metres and subtract the 1 m the Ministry of Transport guidebook keeps above the top pallet. That gives the highest point your goods can reach along the side walls, before you deduct anything hanging below the roof. The bays nearer the apex have more room, but a layout that fills the hall is planned from the eave.

How many racking levels fit depends on your loads, so take the exact count from your racking supplier, but the official numbers set a ceiling. The guidebook names 1 m by 1.2 m as the most common pallet, and DOSH says that, as a general guide, the load should not be taller than the pallet's longest base side, which is 1.2 m. Each level therefore needs more than 1.2 m once the pallet, beam and lifting gap are added. About 8.1 m of usable height can never hold more than six levels of such loads, 11.2 m no more than nine and 14 m no more than eleven; the real figure will be lower.

Every extra level adds weight to the floor. FactoryHub's floor loading calculator puts five loaded levels of two 1-tonne pallets on a 2.7 m by 1.1 m bay at about 3.4 t/m² before a safety margin, and three levels at about 2 t/m². Height without floor strength adds no pallet positions; her guide to pallet racking in a Klang warehouse works through the floor and Bomba checks for a rack.

  • Up to about 25 ft (7.5 m): the general warehouse height in the guidebook. It suits production, assembly, workshops and goods stored on the floor or on low racks. EcoWorld launched the 7,870 sq ft semi-detached factories of Eco Business Park V in Puncak Alam with an 8 m ceiling (The Edge); the units of that size on her list state a 26 ft eave.
  • 30 ft (about 9.1 m): about 8.1 m to the top pallet. Room for selective racking served by a forklift or reach truck, a mezzanine office with full headroom, or machines with tall hoppers. Sime Darby Property advertises a 9 m ceiling height for its Bandar Bukit Raja industrial park (Sime Darby Property).
  • 40 ft or 12 m (about 12.2 m and 12 m): about 11 m to the top pallet. This is pallet racking height; the guidebook says reach trucks can lift beyond 10 m. LBS Bina and KLM Land launched build-to-suit detached factories in the third phase of Alam Perdana Industrial Park, Puncak Alam, with 12 m ceilings and floors of three tonnes per square metre in August 2025 (The Edge). On her list, a 19,840 sq ft semi-D in Meru has a 40 ft eave.
  • 15 m (about 49 ft): about 14 m to the top pallet, which is port distribution scale. The Westport warehouses on her list with a 49 ft eave also have 5 t/m² floors and 20 loading bays. Far taller stores are built around automation: CapitaLand Malaysia Trust described the Elmina Logistics Hub in Sungai Buloh as a 40 m high, single-storey warehouse equipped with an automated storage and retrieval system (The Star).

Heights you meet in Kapar, Meru, Port Klang and Puncak Alam

Eave heights on Ms Teh's list run from 15 ft on semi-detached factories in KIIP, Kapar, to 49 ft on the large warehouses at Westport. Of the units that state an eave, nearly half are under 30 ft and about three in ten reach 40 ft or more. Some listings give only the apex, which says nothing about the height along the walls; ask for the eave.

Around Pulau Indah and Westport, the tall stock is port distribution: warehouses of about 250,000 sq ft with 49 ft eaves, 59 ft apexes and 5 t/m² floors. At Bandar Sultan Suleiman beside Northport, a 189,000 sq ft unit has a 40 ft eave, a 60 ft apex and 20 loading bays, while a 57,447 sq ft warehouse nearby has a 25 ft eave and a 1.5 t/m² floor. Two buildings in the same estate can suit very different operations.

In Kapar the range is wide: semi-detached factories in KIIP state 15 to 17 ft eaves, while detached units in Kapar Bestari and Sungai Kapar Indah state 40 ft. Some of those 40 ft units have a 1.5 t/m² floor, so their height suits light, bulky goods or tall machines better than heavy pallets. In Meru, the 40 ft semi-D carries 3 t/m², and FactoryHub's Meru industrial area data covers the estates there.

In Puncak Alam two newer parks were launched at different heights: 8 m for the first semi-detached factories of Eco Business Park V, and 12 m for the build-to-suit detached factories in the third phase of Alam Perdana. EcoWorld said at the EBP V launch that owners with special requirements, such as a specific floor loading or ceiling height, could have their units customised.

Column spacing and column-free buildings

Columns decide the layout as much as height does. The Ministry of Transport guidebook asks for the warehouse plan to show the columns and other load-bearing pillars, so the approved building plans are the place to read the column grid. If the owner cannot produce them, measure the distance between column centres on site, in both directions.

Then count what fits between two column lines. Racks are built in bays, the module between upright frames in DOSH's terms, and FactoryHub's calculator uses a 2.7 m bay that holds two pallets per level. Aisles must suit the truck you use: DOSH says the width depends on the type of truck, and the guidebook asks for an internal aisle of at least 4 m along the loading docks, kept free of cargo, and walkways of at least 1 m between lines of goods. A column that lands in the middle of an aisle or a bay costs pallet positions on every level.

A column-free hall has no internal columns: the steel frame spans from wall to wall. Production lines, racks and forklift routes can go anywhere, the layout can be re-planned when the business changes, and there are no columns for trucks to hit. The cost is in the frame. CIDB notes that hot-rolled steel is typically used as the I-shaped beams and columns for steel structures with long spans, and the structural engineer sizes the frame and footings for the span and the height.

Multi-storey warehouses always have internal columns, because the upper floor needs support. If you look at a two-storey warehouse in Bukit Raja or Telok Gong, ask for the column grid, the clear height and the floor loading of each level separately.

Is a higher building always better?

No. Height helps only when you can use it, and you pay for it in rent or price whether you use it or not. Check these first:

For a factory, the Selangor by-laws require at least 3 m of headroom in any room in which a person works. That matters for mezzanines: an office on a mezzanine above a working floor needs 3 m below and 3 m above, plus the slab and beams, which a 25 ft eave can give and a 17 ft eave cannot. In the Klang council area, adding a mezzanine or altering the building goes through an alteration plan (Pelan Ubahsuai) application to the Building Department of MBDK.

  • Goods on the floor: DOSH says block stacks should generally stay within a 4:1 ratio of height to the pallet's smallest base side, and four loads high may be the maximum (up to six where the pallet and packaging are designed for it). On a 1 m wide pallet that is about 4 m, so floor storage leaves most of a 40 ft hall empty.
  • Floor strength: more levels mean more tonnes per square metre; run the floor loading calculator before you pay for height.
  • Handling equipment: the guidebook says reach trucks can lift beyond 10 m. Above that you need equipment rated for the height, and aisles sized for it.
  • Cold rooms: the guidebook prefers loads no higher than 4.5 m without racking and 6 m with racking in cold storage warehouses, and you pay to cool the whole volume.
  • Fire: a taller store crosses the sprinkler and Fire Certificate volume lines on a smaller floor (next section).

Why taller factories and warehouses cost more

There is no official figure for what each extra foot of height adds to a price or rent. Ask the owner what the asking figure is based on and compare the unit with others of the same type, size and age in the same estate.

The cost starts with the building. Walls, cladding and columns grow with height: a 40 ft wall has a third more area than a 30 ft wall around the same floor, and the frame and footings are designed for the extra height and span. Then come the fire rules, which in Selangor count volume for stores.

Under the Tenth Schedule of the Selangor by-laws as amended in 2012 (Sel. P.U. 142/2012), a single-storey warehouse for combustible products of 501 to 1,000 m² and under 7,000 m³ needs hose reels, while one of more than 1,000 m² or 7,000 m³ needs hose reels and sprinklers with detection and alarm systems. Volume is measured to the underside of the roof (by-law 135). Counting only up to the eave, 7,000 m³ is reached at about 883 m² (9,500 sq ft) of floor under a 26 ft eave, about 766 m² (8,200 sq ft) under 30 ft and about 574 m² (6,200 sq ft) under 40 ft. A 7,870 sq ft (731 m²) semi-D used as a store holds about 5,800 m³ up to a 26 ft eave, but over 8,900 m³ with a 40 ft eave. For factories the line is floor area: a single-storey factory of more than 2,000 m² needs hose reels and sprinklers.

Volume also brings the Fire Certificate. The Fire Services (Designated Premises) Order 1998 lists storage buildings of more than 7,000 m³, and single-storey factories of 2,001 m² and above fitted with automatic sprinklers. Bomba set full enforcement from the first quarter of 2026: the certificate must be renewed every year, and premises that still have none face a fine of up to RM50,000, five years' jail or both (Astro Awani, Bernama). Her guide on fire protection in a Klang factory or warehouse covers who pays for it in a tenancy.

If you cool or air-condition the space, you pay to treat its whole volume. And a tall building with a weak floor or few loading bays can be priced for height you cannot use.

What to measure and ask before you sign

Bring a laser measure to the viewing and put these questions to the owner in writing:

Ms Teh can help you find a unit in Kapar, Meru, Port Klang or Puncak Alam whose height, floor and power match what you store or make.

  • The eave and apex heights, and which one the listing calls ceiling height.
  • The clear height at the lowest point: under roof beams, sprinkler pipes, lights, ducts and any crane rail.
  • The column grid in both directions, from the approved building plans, and whether the hall is column-free.
  • The floor loading behind the height, from the structural drawings or an engineer's letter.
  • If the volume or floor area puts the building under Bomba: the approved fire design and the current Fire Certificate, and whether your rack height and goods stay within them.
  • For land: if your storage system needs a taller building, the guidebook says to submit the supplier's documents to the approving authority for special approval before construction starts.

Questions buyers and tenants ask

What does ceiling height mean on a factory or warehouse listing?

Usually the eave height, where the roof meets the side wall. Some listings quote the apex at the ridge instead, and some give both. Neither is the clear height you can use, which ends at the lowest beam, pipe, light or sprinkler. Ask which number the listing means and measure the lowest point yourself.

Is clear height the same as eave height?

No. The eave is where the roof meets the wall. Clear height, which the Selangor by-laws call headroom, runs from the finished floor to the lowest member above it, so it is the eave minus anything that hangs below it. In a hall with sprinkler pipes, lights or a crane rail under the roof it is lower than the eave.

How many racking levels fit in a 40 ft warehouse?

Start from about 11.2 m: 40 ft is about 12.2 m, less the 1 m the Ministry of Transport guidebook keeps above the top pallet. With 1.2 m loads on 1 m by 1.2 m pallets, that space can never hold more than nine levels, and fewer once pallets, beams and lifting gaps are added. Your racking supplier gives the exact count, and the floor must carry it.

Why is a high-ceiling factory more expensive to rent or buy?

A taller building needs more wall, cladding and steel, a frame and footings designed for the height, and, as a store, it reaches Selangor's 7,000 m³ line for sprinklers and the yearly Fire Certificate on a smaller floor. There is no official premium per foot, so compare it with units of the same type, size and age in the same estate.

What are the advantages of a column-free factory?

A free layout for production lines, racks and forklift routes, no columns for trucks to hit, and easy re-planning when the business changes. The frame spans from wall to wall, which calls for the hot-rolled sections CIDB describes for long spans, so check the span and the floor loading on the approved plans before you pay for it.

Do warehouses at Pelabuhan Barat (Westport) really have 15 m ceilings?

Some come close. The large warehouses at Westport on Ms Teh's list state a 49 ft eave, about 14.9 m, and a 59 ft apex, with 5 t/m² floors. That leaves about 13.9 m to the top pallet near the walls, less any pipes or lights hanging lower. Her Pulau Indah page lists the units around Westport.

What column spacing suits production in a factory?

There is no one figure: count what fits between two column lines. Rack bays run in modules such as the 2.7 m bay holding two pallets, aisles must suit your forklift, and the Ministry of Transport guidebook asks for at least 4 m along the docks. For production lines, a column-free hall gives the most freedom. Read the column grid on the approved plans or measure both directions on site.

Units in these places

Tell Ms Teh what you need

Send the size, power, ceiling height, budget and move-in date you need on WhatsApp, or call her directly.

WhatsApp Ms TehCall