Where are the high-spec factories and warehouses in Klang? Power, height, floor, cranes and docks
Ms Teh Seok Hoon, PEA 4006. Updated
Among Ms Teh's units on the site in November 2026, the high-spec stock sits near the ports. Pulau Indah and Westport hold most of the 1,000 A units, the 45 to 49 ft eaves, the 5 t/m² floors and the units with 14 to 22 loading bays. Northport and Pandamaran add 1,000 A to 2,500 A factories, Kapar has 1,200 A detached units with 40 ft eaves, and none of her records notes a crane, so ask.
Key takeaways
- Power: her 1,000 A and higher units cluster in Pulau Indah, Westport, Northport, Pandamaran and Klang town, with 6,000 A in Meru and 2,500 A in Pandamaran.
- Height: the 49 ft eaves are three Westport warehouses of about 250,000 sq ft; 40 to 45 ft units appear in Pulau Indah, Northport, Kapar, Meru and Puncak Alam.
- Floors: 5 t/m² is the highest rating on her units; nothing she lists is rated 10 t/m², which usually means a purpose-built slab.
- Cranes and goods lifts are not recorded on any of her units, so a crane user should ask for the crane beam, rail and DOSH papers on each shortlisted unit.
- These figures are her own listing records in November 2026; units let or sell, so confirm the current list before you plan around one.
Where are the 1,000 A factories for rent or sale in Klang?
Of Ms Teh's building units on the site in November 2026, 22 carry 1,000 A or more. Most are near the ports. In Pulau Indah there are a 101,365 sq ft detached factory for rent, a 176,500 sq ft warehouse for sale or rent and a 115,185 sq ft factory for sale, all at 1,000 A. On the Westport side there are a 91,760 sq ft warehouse with 1,200 A and a 98,298 sq ft factory with 1,000 A. Northport has three 1,000 A units of 71,982 to 132,969 sq ft, such as this 132,969 sq ft warehouse.
Away from the port, Klang town has a 65,000 sq ft unit in Bandar Baru Klang and a 38,910 sq ft semi-D in Air Hitam, both 1,000 A for rent, and Kapar has two 1,200 A detached factories with 40 ft eaves. The units with more than 1,000 A are few: a 106,000 sq ft Pulau Indah warehouse for sale with 2,000 A, a 224,228 sq ft Pandamaran factory for rent with 2,500 A and a 76,074 sq ft Meru factory with 6,000 A, for sale or rent.
Read the amp figure as what the main switchboard is rated for, then check it against your load. Our guide on kVA, amps and a TNB upgrade explains the conversion, and FactoryHub's factory power calculator adds up a machine list. If no unit has the power you need, the cost and time of a substation are in who pays for a TNB power upgrade.
Where are the 12 m and 15 m high factories and warehouses?
A 12 m eave is about 39 ft and 15 m is about 49 ft. Her tallest units are three Westport warehouses with 49 ft eaves and 20 loading bays each, all for rent and all close to 250,000 sq ft, such as this 254,729 sq ft warehouse. Next come a 115,185 sq ft Pulau Indah factory with 45 ft eaves and a 225,281 sq ft Westport factory with 44 ft eaves.
At about 40 ft (12 m) the choice is wider: a 189,000 sq ft unit in Bandar Sultan Suleiman, Northport, a 100,574 sq ft Pulau Indah warehouse, a 19,840 sq ft semi-D in Meru, the 1,200 A units in Kapar and several units in Puncak Alam. Eave height is not the same as the clear height under your racking or crane hook; clear height vs ceiling height explains what to measure.
Which units take heavy machinery, and is there a 10 t/m² floor?
The highest floor rating on her units is 5 t/m², about 49 kN/m². It appears on the three 49 ft Westport warehouses, the 189,000 sq ft Northport unit, a 117,345 sq ft Pandamaran factory with 1,000 A, a 10,600 sq ft Klang town unit with 1,000 A and 39 ft eaves and a 60,711 sq ft Pulau Indah warehouse with 22 bays. For a press line, a heavy machining centre or steel stock, those are the places to start.
None of her units is rated 10 t/m². A slab of that strength is usually designed for a known load, so a buyer who needs it normally builds or extends, or adds machine foundations under the heaviest items. For comparison, Sime Darby Property's ready-built factories in Bandar Bukit Raja quote a floor loading of up to 15 kN/m², about 1.5 t/m², with a minimum 9 m ceiling at the production area and 200 A (Sime Darby Property brochure). Check your point and rack loads with FactoryHub's floor loading calculator and our guide on floor loading in kN/m².
Are there factories with an overhead crane or a goods lift?
None of her current listing records notes an overhead crane, a crane size such as 5 or 10 tonnes, or a goods lift, so the honest answer is that each crane unit has to be asked for. Cranes are usually removed or sold separately when a user moves out, while the crane beams and rails may stay. A building with high eaves, a heavy floor and steel portal frames is the likely candidate, which points to the Westport, Pulau Indah, Northport and Pandamaran units above.
When you shortlist, ask for the crane's safe working load, the span and the rail level, the structural drawings that show the crane loads the frame was designed for, and the DOSH certificate if a crane is installed. A 20 tonne crane on a building designed for none needs an engineer's check of columns, footings and floor before it is added. Our guide on overhead cranes and goods lifts covers DOSH approval. Most units in Klang are single storey, so a goods lift matters only in a double storey block; ask for its capacity and certificate too.
Warehouses with loading docks, units with offices and new units
For loading bays, her highest counts are on the island and at Northport: 20 bays on each of the three 49 ft Westport warehouses and on the 189,000 sq ft Bandar Sultan Suleiman unit, 22 bays on a 60,711 sq ft Pulau Indah warehouse, 14 on the 176,500 sq ft Pulau Indah warehouse and 10 on a 100,574 sq ft Pulau Indah warehouse. In the Port Klang Free Zone, the operator says its 512 light industrial units have ramps for forklifts and loading docks for containers, lorries and trucks, and are fitted with office space (PKFZ).
Her records do not list office floor area, so ask for the floor plan. Most detached and semi-D factories in Klang have an office block at the front or a mezzanine office; a tenant who needs a large office floor should say so at the first enquiry. On brand new units: the newer estates in her list are in Puncak Alam, where Eco Business Park V is the latest, and in the managed parks covered in managed parks vs older estates. A new building also needs its CCC and a TNB supply in place before you can move in.
A 30,000 sq ft factory with 1,000 A and a crane: where in Klang?
This is a common brief for metal fabrication. In her list, the units nearest to it are a 39,341 sq ft detached factory for rent in Sungai Kapar Indah and a 22,556 sq ft detached factory for sale in Kapar Bestari, both 1,200 A with 40 ft eaves; a 38,910 sq ft semi-D in Air Hitam with 1,000 A; and a 38,161 sq ft detached unit in Taman Industri Alam Jaya, Puncak Alam with 1,200 A. None records a crane, so ask whether crane beams are in place or whether the frame can take one.
Shah Alam is outside the area Ms Teh covers, so she does not list units there. Kapar and Meru are the nearest parts of Klang for this kind of operation; our guide on metal fabrication factories in Klang covers the class of industry, DOE and council checks.
More on automation-ready buildings
FactoryHub, fellow CID agent Peter Tan's site, has a wider checklist for automation-ready factories and warehouses.
Questions buyers and tenants ask
Where can I find a 1,000 A factory for rent in Selangor?
In the Klang district, Ms Teh's 1,000 A rentals in November 2026 were in Pulau Indah, Westport, Northport, Pandamaran, Bandar Baru Klang and Air Hitam, from about 38,900 to 224,000 sq ft. Kapar and Puncak Alam add 1,200 A units of 38,000 to 39,000 sq ft. Outside Klang she does not list units.
Where is a warehouse with a 15 m (49 ft) eave in Port Klang?
Her three 49 ft warehouses are at Westport on Pulau Indah, each about 250,000 sq ft with 20 loading bays and a 5 t/m² floor, for rent. Their power is 400 A, which suits storage and distribution more than processing.
Is there a factory with a 10 ton crane for sale in Klang?
Her records in November 2026 did not note a crane on any unit. For a 10 tonne crane, shortlist high-eave units with steel frames and 4 to 5 t/m² floors, such as the Pulau Indah and Westport factories for sale, then ask for crane beams, structural drawings and any DOSH certificate.
Do Klang factories for rent come with an office?
Most detached and semi-D units have an office block or a mezzanine office, but sizes vary and her records do not list them, so ask for the floor plan. PKFZ says its light industrial units on Pulau Indah are fitted with office space.
I need a 30,000 sq ft detached factory in Shah Alam with 1,000 A and a crane. Can Ms Teh help?
Shah Alam is outside her area. In Klang, the closest matches in her list were 1,200 A detached factories of 22,556 and 39,341 sq ft in Kapar with 40 ft eaves, and a 1,000 A semi-D of 38,910 sq ft in Air Hitam. Ask her whether crane beams are in place.
Is Pelabuhan Barat the same as Westport, and does it have high-power units?
Yes, Pelabuhan Barat is the Malay name for Westport on Pulau Indah. Her Westport units in November 2026 included a 91,760 sq ft warehouse with 1,200 A and a 98,298 sq ft factory with 1,000 A and a 5 t/m² floor; the 49 ft warehouses there have 400 A.
What does a Klang factory need for an automated production line?
Power that does not drop, a floor that suits the machines, and room to lay out the line. TNB says medium voltage supplies normally have alternative circuits restored within up to four hours, against possibly more than three hours for 400 V faults, so automated lines favour units with a medium voltage supply or space for a substation. Check the floor rating under each machine, the clear height, and a column grid that does not cut the line.
Units in these places
- Terrace Factory/Warehouse for Rent in Perigi Nanas, 2,949 sq ft · RM 4,500 / month
- Industrial Land for Rent in Pulau Indah, 0.45 acres · RM 6,000 / month
- Semi-D Factory/Warehouse for Sale or Rent in Kampung Kastam, 7,200 sq ft, 200A · RM 2,800,000 or RM 13,000 / month
- Detached Factory/Warehouse for Sale in Bandar Sultan Suleiman, 51,189 sq ft, 200A · RM 18,000,000
- Terrace Factory/Warehouse for Rent in Pandamaran, 7,315 sq ft, Light Industrial · RM 13,000 / month
- All listings
Updated
Sources
Tell Ms Teh what you need
Send the size, power, ceiling height, budget and move-in date you need on WhatsApp, or call her directly.